Du-All 12 volt 5ah Battery w/
charger |
$ 125 |

12-volt 5-amp Battery with overnight charger. Brand New. Battery
is great for use with Motion Picture Cameras & accessories
such as:
Aaton LTR-7, 54, XTR, XTR+, XTR Prod Arri 16S, S/B, M, BL, SR-1,
2 Arri 35mm BL-1, 2, 3, 4 Éclair ACL, NPR, Camflex, Frezzolini
FR-16, Canon Scoopic M, MN, MS Bolex EBM, EL, ESM motor All Tobin
Cinema Systems crystal motors. Sony & Panasonic Cameras &
other Portable DC Monitors. Video Cameras with 4-Pin XLR Connector
on body and 12-volt operation. A special cable may be needed or
your original cable may need modification but we can do the conversion
if needed at low cost to you. We can also change the connector
on the battery to whatever you like. Just let us know and we can
give an estimate. This is a nice compact battery and will give
you years of use with proper usage. Will run about 25 400’
Magazines on an Arri 16SR.
Comes with:
- 4-Pin Female XLR connector
- Built In fuse (5 amp)
- Carry strap (for over the shoulder)
- Overnight Slow Charger (8-12 hours)
Colors Available:
- Red with black trim
- Grey with black trim
|
Du-All 8.4 volt 4200Mah Ni-MH
Battery |
$ 150 |
8.4-volt
4-amp Battery. Brand New. Less than half the size and weight of
the battery above:
Comes with:
- 4-Pin Female XLR connector
- Carry strap (over the shoulder)
to charge this battery you will need to purchase separately the
Ansmann ACS110 Traveler Charger $ 120 (Listed Below)
|
Du-All 12 volt 4200Mah
Ni-MH Battery |
$ 175 |
12-volt
4-amp Battery. Brand New. Less than half the size and weight of
the battery above:
Comes with:
- 4-Pin Female XLR connector
- Carry strap (over the shoulder)
to charge this battery you will need to purchase separately the
Ansmann ACS110 Traveler Charger $ 120 (Listed Below)
|
Aaton 12 Volt 1600Mah Ni-CD On-Board
Recell |
$ 100 |
12-volt
1600Mah Ni-Cad Cells. For use with Original Aaton CHA-2 &
3 Dual Chargers
Send your battery in and we can install it for you for $ 10.00
|
Aaton 12 Volt 3400Mah Ni-MH On-Board
Recell |
$ 175 |
12-volt
1600Mah Ni-Cad Cells. Will not work with Aaton Dual Charger. You
will need to purchase the Ansmann ACS110 Traveler Charger for
$ 120 to properly charge this battery.
Send your battery in and we can install it for you for $ 10.00
|
Arri 16SR 12 Volt 1.6ah Ni-CD
On-Board battery |
$ 375 |
Arri 16SR 12 Volt 1600Mah Ni-CD
On-Board Recell |
$ 100 |
12-volt
1600Mah Ni-Cad Cells. For use with Original Arri SR Dual Charger.
Send your battery in and we can install it for you for $ 10.00
|
Arri 16SR 12 Volt 3400Mah Ni-MH
On-Board Recell |
$ 175 |
12-volt
1600Mah Ni-Cad Cells. Will not work with Original Arri SR Dual
Charger. You will need to purchase the Ansmann ACS110 Traveler
Charger for $ 120 to properly charge this battery.
Send your battery in and we can install it for you for $ 10.00
|
Beaulieu 7.2 Volt 1650Mah (R-16,
4008,5008) |
$ 110 |
Works
with Beaulieu Cameras listed above.
Requires:
Beaulieu Power Cable $ 35
Ansmann ACS110 Chgr $ 120
|
Beaulieu 4.8 Volt 1650Mah (2008)
|
$ 100 |
Works
with Beaulieu S2008 Camera
Requires:
Beaulieu Power Cable $ 35
Ansmann ACS110 Chgr $ 120
|
Beaulieu 7.2 Volt 1000 Mah NiMh
onboard battery |
$ 225 |
Works
with Beaulieu 4008 Camera
Requires:
Original Charger or
Ansmann ACS110 Chgr $ 120 &
Beaulieu Battery Charging Container $25.00
|
Beaulieu 7.2 Volt 450Mah Ni-MH
(Recelled) |
$ 175 |
Works
with Beaulieu 4008 Camera
Requires:
Original Charger or
Ansmann ACS110 Chgr $ 120 &
Beaulieu Battery Charging Container $25.00
|
Beaulieu 4008 Series Dummy Adapter
(for external battery) |
$ 125 |
Works
with Beaulieu 4008 Series Cameras 4008 4008ZM,4008ZM2,4008ZM4
only
Allows use of external batteries to be connected to camera via
power cable. Longer life battery solutions can be obtained this
way.
Requires:
Beaulieu Power Cable $35.00
Beaulieu 7.2 Volt 1650Mah battery $110.00
Ansmann ACS110 Chgr $ 120
|
Beaulieu S2008 Series Dummy Adapter
(for external battery) |
$ 125 |
Works with Beaulieu S2008 Camera only
Allows use of external batteries to be connected to camera via
power cable. Longer life battery solutions can be obtained this
way.
Requires:
Beaulieu Power Cable $35.00
Beaulieu 4.8 Volt 1650Mah battery $100.00
Ansmann ACS110 Chgr $ 120.00
|
Beaulieu 7.2 Volt 700Mah Ni-MH
(recelled) |
$ 200 |
Works
with Beaulieu 5008S Camera
Requires:
Original Charger or
Ansmann ACS110 Chgr $ 120
|
Bolex EBM Power Grip Battery
1200mah |
$ 140 |
Works
with the Bolex EBM Power Grip
Requires:
Ansmann ACS110 Chgr $ 120
Bolex EBM Charging Cable $ 35

|
Canon Scoopic 6 Volt 300 mah Replacement Cell
(requires two 6 volts batteries to recell onboard battery) |
$ 30 each |
Canon Scoopic 12 volt 300 mah (small)Onboard battery
-Complete replacement with new cells
|
$ 150 |
Canon Scoopic M, MN, MS
12 Volt 700mah Replacement Cell |
$ 60 |
Canon Scoopic S-12 (large)
12V 700 mah Onboard battery
-Complete replacement with new cells
|
$ 175 |
CP-16 Cinema Products 20volt
700 mah NiCad replacement cells only (requires installation)
|
$ 100 |
CP-16 Cinema Products NC-4 20volt
onboard battery |
$ 175 |
Radio Shack reverse converter
120VAC Input-240VAC output-Universal For Euro Plug-US plug
|
$ 25 |
| PX625A Button Cell (for Nizo LIghtmeter) |
$ 5 each |
Phylion AN2000A 14.8 Volt 130W
Li-Ion Battery |
$ 300 each |
Anton
Bauer Gold Mount compatible battery. Very strong and lightweight.
Has L.E.D. Indicator Status lights
Requires:
Phylion PL3680D Dual Li-Ion Charger
|
Phylion PL3680D Dual Li-Ion Battery
Charger |
$ 400 |
Anton
Bauer Gold Mount compatible battery. Very strong and lightweight.
Has L.E.D. Indicator Status lights. Has 4-Pin XLR for us as DC
power supply. DC Output 15V (DC) 5A
Input Voltage: 110-240V
Output battery recharge: 16.8V 1.6A
Requires:
Phylion AN2000A Battery
|